Série Vidéo

Le Coin de Kent

Vidéos courtes et sans détour sur le CVC et l'efficacité énergétique avec Kent Steeves, l'expert de Greenfoot Énergie en thermopompes, isolation, solaire et particularités du climat du Canada atlantique.

Regarder la dernière Liste de lecture complète sur YouTube →

Dernier épisode

Là où la magie opère : comment le compresseur d'une thermopompe crée de la chaleur

Points clés à retenir

Le compresseur comprime la vapeur de réfrigérant à basse pression en un gaz chaud à haute pression.
Comprimer un gaz rapproche les molécules et les accélère, et ce mouvement, c'est la chaleur.
Le gaz chaud voyage vers un serpentin, où un ventilateur transfère la chaleur dans votre pièce ou vos conduits.
Parce qu'elle déplace la chaleur au lieu de brûler du combustible, une thermopompe livre bien plus de chaleur par unité d'électricité.

Posez une question à l'équipe de Kent → Voir le blogue →

Épisodes précédents

Plus de vidéos courtes de Kent, avec les points clés en texte pour que vous puissiez survoler ou regarder.

Qu'est-ce que la vanne d'inversion? Comment une seule pièce fait passer votre thermopompe du chauffage à la climatisation

Kent montre à Rob la vanne d'inversion, la petite pièce qui permet à une seule thermopompe de chauffer et de climatiser votre maison. Un piston à l'intérieur glisse d'un côté pour la climatisation et de l'autre pour le chauffage, redirigeant le flux de réfrigérant en appuyant sur un bouton. Vous choisissez la température, la vanne fait le reste.

La vanne d'inversion est la pièce qui fait basculer votre système entre le chauffage et la climatisation.
À l'intérieur, un piston glisse d'un côté pour la climatisation et de l'autre pour le chauffage.
Elle redirige le flux de réfrigérant selon ce que vous réglez sur votre thermostat.
Sans cette seule petite pièce, votre thermopompe ne pourrait pas fonctionner comme climatiseur.

Comment les thermopompes se dégivrent automatiquement en hiver (système intelligent à deux ventilateurs)

Kent explique le système à deux ventilateurs d'une thermopompe moderne : comment il aspire l'air à travers les serpentins, détecte le givre hivernal, bascule brièvement en mode climatisation pour faire fondre la glace sur le serpentin extérieur, puis revient immédiatement au chauffage à efficacité maximale.

Une unité extérieure à deux ventilateurs aspire plus d'air à travers les serpentins, ce qui augmente l'efficacité.
En hiver, du givre peut se former sur le serpentin extérieur, et le système le détecte automatiquement.
Il inverse brièvement vers le mode climatisation et envoie de la chaleur à l'extérieur pour faire fondre le givre (environ 4 à 5 minutes).
Vous ne sentirez aucune baisse de température à l'intérieur, et le système reprend son efficacité de chauffage maximale aussitôt après.

À l'intérieur d'un système géothermique Nordic de 50 tonnes

Kent fait visiter une véritable installation de thermopompe géothermique Nordic de 50 tonnes : boucles verticales, réservoir tampon de 500 gallons, et comment le système procure 50 à 60 % d'économies d'énergie sur un espace commercial de 30 000 pi².

Les thermopompes géothermiques (à source au sol) puisent la chaleur des températures stables sous terre, toute l'année.
Les boucles verticales sont forées profondément dans le roc, idéales lorsqu'on n'a pas la surface horizontale pour des tranchées.
Un réservoir tampon de 500 gallons régularise la demande et protège le compresseur lors de gros cycles commerciaux.
Résultat réel sur ce bâtiment de 30 000 pi² : 50 à 60 % d'économies d'énergie comparé à un chauffage conventionnel.

Pourquoi ces ailettes de thermopompe sont-elles dorées? La corrosion côtière expliquée

Kent explique pourquoi les thermopompes près de la côte ont besoin d'ailettes dorées pour résister à la corrosion par l'air salin, et pourquoi c'est important pour l'efficacité et la durée de vie au Canada atlantique.

Les ailettes dorées (à revêtement parasite) résistent à la corrosion par l'air salin, qui peut voyager jusqu'à 100 km à l'intérieur des terres.
La plupart des maisons du Canada atlantique se trouvent dans cette zone côtière de 100 km, donc la protection des serpentins compte ici.
Des ailettes corrodées restreignent le débit d'air, réduisent l'absorption de chaleur et diminuent l'efficacité globale.
Si vous habitez près de la côte, demandez l'option de thermopompe avec ailettes dorées (résistante à la corrosion).

Le cerveau de votre thermopompe mini-split : comment la technologie onduleur économise l'énergie

Kent explique ce que fait réellement la carte de contrôle onduleur, pourquoi le fonctionnement à vitesse variable réduit votre facture d'électricité, et pourquoi «régler et laisser faire» est le bon conseil pour les propriétaires canadiens.

La carte de contrôle onduleur module la vitesse du compresseur pour correspondre à la charge exacte de chauffage ou de climatisation, sans simplement s'allumer et s'éteindre à pleine puissance.
Fonctionner à basse vitesse en conditions de charge partielle tire moins d'ampérage et réduit la consommation d'électricité.
Un temps de fonctionnement prolongé à basse vitesse est plus efficace que des cycles répétés à pleine puissance : ce n'est pas un problème.
«Régler et laisser faire» est la meilleure habitude : des consignes stables permettent à l'onduleur de maintenir le confort sans montées en régime agressives.

Parcourir la série complète

De nouveaux épisodes sortent régulièrement. Mettez cette page en favori ou abonnez-vous sur YouTube pour ne manquer aucun conseil.

Du blogue Greenfoot

Combinez les vidéos de Kent avec des articles plus poussés, des guides et des explications de subventions. Faites défiler chaque article ci-dessous.

insulation

Best Insulation for Older British Columbia Homes in 2026

British Columbia spans climate zones 4 through 8, so there is no single best insulation for older BC homes. Coastal homes must prioritize rain control and outward drying before wall fill. Interior and northern homes need higher R-values and wind-tight assemblies. Blown-in cellulose is a strong attic option everywhere; spray foam is best used selectively at rim joists; exterior mineral wool is the best deep-wall upgrade during recladding. Better Homes BC 2026 programs include the Home Renovation Rebate Program (up to $5,500 for insulation), the income-based Energy Savings Program (updated July 6, 2026), and the free Energy Conservation Assistance Program. Contractor registration and pre-approval are required for all three.

10 min de lecture

insulation

Best Insulation for Older Prince Edward Island Homes in 2026

For older PEI homes, the best insulation sequence is control bulk water first, then air seal, then bring a properly vented attic to R-50 to R-60 with blown-in cellulose. Rim joists and basement walls are next when dry. Dense-pack cellulose can improve empty wall cavities; continuous exterior mineral wool is the better answer during recladding. The 2026 efficiencyPEI programs include a Free Home Insulation Program for households below $55,000 income, formula-based standard rebates starting with a $99 audit, and the Energy Efficiency Loan Program providing up to $10,000 at 5% over 7 years. All programs require approval before work begins.

10 min de lecture

insulation

Best Insulation for Older Newfoundland and Labrador Homes in 2026

For older Newfoundland and Labrador homes, the right insulation depends on coastal vs. inland conditions. Attic blown-in cellulose targets R-50 to R-55 on the island and R-60 in Labrador. TakeCharge rebates cover up to $3,000 for combined attic and basement work. The NLHC Home Energy Savings Program stopped new applications June 15, 2026 pending fall 2026 program changes that will raise forgivable-loan amounts to $10,000 (NL) and $13,000 (Labrador). Closed-cell spray foam is best at rim joists and difficult coastal details. Continuous exterior mineral wool is the best whole-wall upgrade during recladding.

10 min de lecture

insulation

Best Insulation for Older New Brunswick Homes in 2026

For older New Brunswick homes, the best insulation strategy starts with a full assessment, attic sealing and R-60 blown-in cellulose, and targeted closed-cell spray foam at rim joists and crawl spaces. Dense-pack cellulose works for accessible wall cavities; continuous exterior mineral wool is the better answer for thermal bridging during recladding. SaveEnergyNB's Total Home program covers attics to R-60, walls to R-30, basements to R-30, and headers to R-40. Households below $70,000 income can access no-cost upgrades through the Enhanced Energy Savings Program. The correct program must be registered before work begins.

10 min de lecture

insulation

Best Insulation for Older Nova Scotia Homes in 2026

The best insulation for an older Nova Scotia home depends on wall assembly and moisture risk. Attic blown-in cellulose to R-60 is the highest-return first upgrade. Spray foam excels at rim joists and crawl spaces in balloon-framed homes; dense-pack cellulose suits historic plaster walls via drill-and-fill; exterior mineral wool addresses thermal bridging without interior disruption. Air sealing and an HRV are prerequisites to any tightening work. 2026 Efficiency NS rebates reach up to $5,000 standard, $15,000 for moderate-income households, and $30,000 when stacked with the Oil to Heat Pump Affordability Program.

9 min de lecture

Solar panels on a New Brunswick home connected to the NB Power grid under net metering

solar energy

NB Power's Proposed Solar Billing Changes: What New Brunswick Homeowners Need to Know

NB Power has filed proposed changes to solar net metering in New Brunswick with the NBEUB (Matter EL-003-2025). The proposal would replace 1-to-1 retail-rate net metering with a lower avoided-cost export credit of about 6.77 cents per kWh, add a new monthly demand charge of about $13 per kW based on peak 15-minute usage, and raise the commercial solar cap to 500 kW. An October 31, 2026 application approval deadline and October 31, 2027 inspection deadline would lock in the current rate for grandfathered customers until 2037. None of this is approved. Solar NB Solaire has registered as a formal intervenor. The post explains each proposed change, clarifies how the grandfathering window differs from the Save Energy NB rebate deadlines, lists what is not changing, and gives Greenfoot's honest guidance to NB homeowners considering solar.

8 de lecture

heat pumps

Why Greenfoot Fabricates Heat Pump Stands and Ductwork in Atlantic Canada

Every stand, duct, and snow cover that Greenfoot installs across Atlantic Canada is fabricated in-house at our Atlantic Canada shop: welded, QC'd, and shipped to branches from Newfoundland to New Brunswick. This post covers what is made locally, why aluminum welding expertise matters, how stand height protects a heat pump through Atlantic winters, and why local manufacturing gives homeowners a more reliable installation.

5 de lecture

A technician cleaning a mini split heat pump filter during a shoulder season maintenance visit - Greenfoot Energy Solutions

heat pumps

Shoulder Season Heat Pump Maintenance: A Guide for Atlantic Canada and BC

Spring and fall are the smartest times to service a heat pump in Atlantic Canada and BC. This guide covers how the two regions' shoulder seasons compare, why pre-winter tune-ups cut energy waste by 10 to 25 percent and extend system life to 15 to 20 years, what a Greenfoot YETI maintenance visit includes, and exactly when to book.

6 de lecture

A happy Canadian couple beside a heat pump water heater reviewing lower utility bills - Greenfoot Energy Solutions

heat pumps

How Much a Heat Pump Water Heater Saves Canadian Homeowners

A heat pump water heater moves heat instead of making it, cutting water heating costs by up to 50 percent. This guide breaks down real annual savings of $270 to $700 or more by province, a simple payback calculation, the Canadian rebates that shorten the timeline, and how the numbers hold up through a cold Canadian winter.

6 de lecture

The compressor inside a ductless mini split heat pump outdoor unit - Greenfoot Energy Solutions

heat pumps

How a Heat Pump Compressor Creates Heat

The compressor is where a heat pump makes its heat. Kent Steeves explains how squeezing refrigerant vapor speeds up the molecules to create warmth, how that heat is pumped into your home through an indoor head or your ductwork, and why moving heat this way is far more efficient than burning fuel.

4 de lecture

maintenance

Furnace Maintenance Checklist for Canadian Homes

A furnace works hardest in the coldest months, so a little upkeep goes a long way. This checklist covers the jobs you can do yourself, the professional tune-up you should book every fall, and the warning signs that mean it is time to call a technician.

7 de lecture

A central air conditioner condenser unit outside a Canadian home being cleaned - Greenfoot Energy Solutions

maintenance

Central Air Conditioner Maintenance Guide

A central air conditioner rewards a little seasonal care with lower bills and fewer mid-summer breakdowns. This guide covers the cleaning and filter tasks you can handle, the spring tune-up to book, and the symptoms that mean it is time to call a technician.

7 de lecture

maintenance

Seasonal HVAC Maintenance Checklist

HVAC systems have a natural rhythm: get ready to cool in spring, keep it running in summer, get ready to heat in fall, and protect the system in winter. This season-by-season checklist keeps your equipment efficient and helps you avoid breakdowns when you need comfort most.

8 de lecture

maintenance

How Often Should You Service Your HVAC System?

The right service frequency depends on your equipment. Furnaces and air conditioners generally need one professional visit a year, while heat pumps run year-round and need service twice a year. Here is a clear schedule and why it matters for efficiency, warranties, and lifespan.

6 de lecture

A homeowner deciding whether to repair or replace an aging HVAC system - Greenfoot Energy Solutions

maintenance

HVAC Repair vs Replace: The $5,000 Rule

When an aging system breaks down, the repair-or-replace question can feel overwhelming. This guide walks through the $5,000 rule, the role of age and efficiency, and how to know when a repair is throwing good money after bad.

7 de lecture

maintenance

How Much Does HVAC Maintenance Cost in Canada?

HVAC maintenance is one of the lower-cost ways to protect an expensive system, but prices vary by equipment and region. This guide covers typical tune-up and diagnostic costs in Canada, what drives them, and how a maintenance plan can lower your total spend.

7 de lecture

Close-up of a heat pump reversing valve, the brass golden valve inside a mini split - Greenfoot Energy Solutions

heat pumps

How a Heat Pump Reversing Valve Works

The reversing valve, sometimes called the golden valve, is the part that lets a single heat pump both heat and cool your home. Kent Steeves explains how an internal piston reroutes refrigerant to switch modes, what happens during defrost, why technicians love this one small brass part, and the warning signs of a valve that is starting to fail.

5 de lecture

A homeowner cleaning an HVAC filter next to a professional technician servicing the system - Greenfoot Energy Solutions

maintenance

DIY vs Professional HVAC Maintenance

You can handle more HVAC maintenance than you might think, but some jobs belong to a certified technician for reasons of safety and warranty. This guide draws a clear line between the DIY tasks worth doing and the professional work that keeps your system safe.

6 de lecture

A homeowner noticing warning signs from an HVAC system that needs service - Greenfoot Energy Solutions

maintenance

Warning Signs Your HVAC System Needs Service

HVAC systems usually warn you before they fail. Catching the early signs, unusual noises, odd smells, weak airflow, short cycling, or a climbing energy bill, lets you fix a small problem before it turns into an expensive breakdown.

6 de lecture

Cold-climate heat pump replacing oil heat at an Atlantic Canadian home with Greenfoot Energy

heat pumps

How Much Does It Cost to Switch From Oil Heat to a Heat Pump?

Heating with oil is expensive in Atlantic Canada. Here is what it really costs to switch from oil heat to a heat pump, including equipment, installation, rebates, running-cost comparisons, and real payback examples for oil-heated homes.

9 de lecture

insulation

What to Ask an Insulation Contractor Before You Hire

Insulation work disappears behind walls and under attic boards, so the questions you ask before hiring matter. This checklist covers installer certification (CAN/ULC-S705 for spray foam), CCMC product listings, written quotes with R-values, air sealing, rebate program registration, warranty, old insulation removal, and proof of insurance and WCB, plus the red flags to watch for in Atlantic Canada and BC.

9 min de lecture

insulation

Insulation Rebates in Atlantic Canada and BC: A 2026 Guide

Insulation rebates are available across Atlantic Canada and BC through Efficiency Nova Scotia, NB Power's Total Home Energy Savings Program, efficiencyPEI, takeCHARGE in Newfoundland and Labrador, and CleanBC Better Homes. Most start with an EnerGuide home energy assessment. The federal Canada Greener Homes Grant is closed, though the Greener Homes Loan may still help. This guide explains how each program works and how to stack rebates.

10 min de lecture

insulation

Attic Insulation Removal Cost: When It Is Needed and What to Expect

Attic insulation removal is not always needed, but contamination from rodents, mould or water, plus suspected vermiculite, can make it necessary. This guide explains when removal makes sense, what it costs in Canada (roughly 1.50 to 2.50 CAD per square foot for clean vacuum removal, more for contaminated or hazardous material), the vacuum and decontamination process, and the critical caution to test for asbestos before disturbing vermiculite.

9 min de lecture

insulation

When to Use Spray Foam Instead of Blown-In Insulation

Spray foam and blown-in insulation both have a place, but the right one depends on the job. Choose closed-cell spray foam for rim joists, crawl spaces, damp basements, cathedral ceilings, thin walls and irregular cavities where air and moisture control matter. Choose blown-in for open attics, budget retrofits and drill-and-fill walls. This Canadian decision guide gives a clear checklist for Atlantic Canada and BC.

9 min de lecture

insulation

Best Attic Insulation for Cold Canadian Climates

In a cold Canadian climate, the best attic insulation is usually deep blown-in cellulose or fibreglass built to R-50 or R-60, installed after the attic floor is air sealed. Closed-cell spray foam is the smart pick for cathedral ceilings, no-attic roofs and sealing penetrations first. This guide covers NRCan R-values, ventilation and ice dam prevention for homes in Atlantic Canada and BC.

9 min de lecture

insulation

Spray Foam and the Building Code in Canada: What to Know

Spray foam is a plastic, so Canadian building codes require careful handling. Foam in living spaces usually needs an approved thermal barrier such as half-inch drywall, while attics and crawl spaces may allow an ignition barrier. Closed-cell foam must meet CAN/ULC-S705 and be applied by a certified installer, products often carry a CCMC evaluation, and vapour control still matters. Codes are adopted provincially across NS, NB, PEI, NL and BC.

9 min de lecture

insulation

What Is the Healthiest Insulation for a Home in Canada?

There is no single healthiest insulation. Cellulose and formaldehyde-free mineral wool are the easiest low-VOC choices for sensitive households, while fibreglass and properly cured spray foam are also safe to live with. This guide compares each material on VOCs, dust, moisture and safe installation, and explains why good ventilation and a careful, certified crew matter most for Canadian homes in Atlantic Canada and BC.

9 min de lecture

Greenfoot Energy heat pump and home comfort service across Metro Vancouver, British Columbia

services offered

Greenfoot Now Serves All of Metro Vancouver

Greenfoot Energy now covers every community in Metro Vancouver, from Vancouver and Burnaby to Surrey, Coquitlam, and the North Shore. Here is where we work and the heat pump, AC, solar, insulation, and maintenance services available near you.

6 de lecture

insulation

Does Spray Foam Insulation Affect Home Resale Value in Canada?

Spray foam can help or hurt resale value in Canada, and the deciding factor is documentation. A certified, code-compliant install that lowers energy bills is a real selling point that buyers and lenders like. Undocumented or uncertified foam, or foam hiding the roof deck, can raise inspection and financing questions. Keep certificates, warranty, and rebate paperwork to make foam an asset at sale time.

9 min de lecture

insulation

Why Are People Removing Spray Foam Insulation? An Honest Look

Online stories about ripping out spray foam are scary, but removal is uncommon and almost always traces back to a poor installation, not the product. This honest guide explains the real reasons foam gets removed, off-ratio mixing and odour, trapped moisture, inspection access, and undocumented installs at sale time, what removal costs in Canada, and how a certified install prevents it.

9 min de lecture

insulation

Spray Foam vs Blown-In Insulation Cost: A Canadian Price Guide

Blown-in cellulose or fibreglass is the most affordable insulation at roughly 1.50 to 2.50 CAD per square foot, open-cell spray foam sits in the middle, and closed-cell spray foam runs 3.50 to 7.00 CAD per square foot. This guide gives real Canadian cost ranges, worked examples for an attic, a wall retrofit and a rim joist, explains why closed-cell costs more, and shows how rebates in Atlantic Canada and BC lower the bill.

9 min de lecture

insulation

Spray Foam vs Blown-In Insulation: A Canadian Homeowner's Guide

Spray foam and blown-in insulation sound similar but behave very differently. Spray foam insulates and air seals in one step, while blown-in cellulose or fibreglass insulates affordably but needs separate air sealing. This guide compares R-value, cost, health, building code and resale, then shows which product belongs in your attic, walls, basement and crawl space, with Canadian pricing for Atlantic Canada and BC.

11 min de lecture

23-panel residential rooftop solar install by Greenfoot Energy in British Columbia

solar energy

Is Greenfoot Solar Worth It? A 10/10 Customer Review

A British Columbia homeowner spoke to several solar companies before choosing Greenfoot, and the difference in the quality of conversation was, in his words, radically different. He walks through his 23-panel install: the sales experience, how pricing was handled, what the final bill looked like, and why the system puts a smile on his face every time he sees it. A real customer's account, with context on net metering, solar savings, and what to expect from an honest solar install in British Columbia.

5 min de lecture

Close-up of mini split heat pump fins and inverter components - Greenfoot Energy Solutions

heat pumps

The Brain Inside Your Mini Split: How Inverter Technology Saves Energy

The inverter control board is the brain of your mini split heat pump. Instead of blasting at full power and shutting off like older systems, an inverter-driven compressor modulates its speed to match exactly what your home needs at any moment. The result is steadier temperatures, quieter operation, lower electricity bills, and better humidity control during cooling season. Kent Steeves explains what the board actually does, why longer runtime is not a problem with inverter technology, and why "set it and leave it" is the best advice for Canadian mini split owners.

6 min de lecture

Greenfoot technician installing a ductless mini-split heat pump on the exterior wall of a Canadian home replacing electric baseboard heat

heat pumps

Replace Baseboard Heat with a Ductless Mini-Split Heat Pump: How It Works and How Much You Save

Electric baseboard heat is everywhere in Canadian homes, and it is one of the most expensive ways to heat a house: every kilowatt-hour in becomes one kilowatt-hour of heat, full stop. A cold-climate ductless mini-split heat pump moves heat instead of making it, delivering three to four kilowatt-hours of heat for every one you pay for, which is why ENERGY STAR Canada certified models can cut Maritime heating bills by 50 to 60 percent. Russell Smith walks through a real Greenfoot install: the placement walk-through, the wall bracket, the core drill, the outdoor compressor on aluminum stands, the line set, the vacuum and refrigerant charge, and the homeowner walkthrough at the end. Single-head installs take five to six hours. Typical Canadian cost is $4,500 to $7,500 before stacking provincial and federal rebates.

7 min de lecture

insulation

Drill and Fill Insulation for Older Homes in Canada: How Dense-Pack Cellulose Retrofits Work

Most Canadian homes built before 1960 have zero wall insulation, just bare cavities behind plaster and lath. Drill and fill solves that in a single day from the outside, with no interior demolition, by dense-packing the wall cavities with cellulose at 3.5 lb per cubic foot. Russell Smith walks through how the retrofit works, why dense-pack cellulose beats foam and fibreglass for old walls, the typical 15 to 25 percent heating savings, and which provincial rebates in NB, NS, PEI, NL, and BC apply.

7 min de lecture

Hands removing the front filter panel of a wall-mounted ductless mini-split heat pump for cleaning

maintenance

How to Maintain Your Mini-Split Heat Pump: A Canadian Homeowner's Guide

After your mini-split heat pump is installed, there are really only three jobs you need to handle as a homeowner: cleaning the filters every few weeks, caring for the outdoor unit through the seasons, and keeping the condensate drain clear. This short Canadian guide and video walk through each one, plus when to call in a professional.

5 min de lecture

Greenfoot Service-Yeti technician performing a YETI Membership Plan tune-up on a residential mini-split heat pump

maintenance

Are Heat Pump Maintenance Plans Worth It? The Real Math Behind YETI Memberships

Heat pumps run year-round and need roughly twice the maintenance of a furnace, but most homeowners skip it, and quietly lose 25%+ of their efficiency over a decade. We ran the real 5-year numbers on YETI Base ($14/mo), Summit ($25/mo) and Peak ($45/mo) plans, including full feature comparisons and three real-world scenarios, to show exactly when a maintenance plan pays for itself.

10 min de lecture

Close-up of gold-coated heat pump fins on outdoor coil with corrosion-resistant Gold Fin coating

heat pumps

Why Do Heat Pumps Have Fins? Salt Air, Corrosion & Gold-Fin Coating Explained

Heat pump fins maximize heat transfer, but in coastal areas they're under constant attack from salt air that can travel up to 100 km inland. Gold Fin coating creates a corrosion-resistant barrier that protects the coil, preserves airflow and efficiency, and adds years of reliable life. Essential for any home in Atlantic Canada.

5 min de lecture

Residential solar panels on a Canadian home, by Greenfoot Energy Solutions

solar energy

Is Solar Energy Reliable for Canadian Homes? A Straight-Talk Guide

Modern solar panels are built to last 25-plus years, but reliability isn't just about the panels. It is the inverter, the warranty, and how the system is designed for Canadian winters. Here's a straight-talk look at how reliable home solar really is in Canada, what fails (and what doesn't), and whether the math actually works out for your house.

8 min de lecture

geothermal

Inside a 50-Ton Nordic Geothermal System: How Ground-Source Heat Pumps Work

Take a tour with Kent Steeves of a real 50-ton Nordic geothermal heat pump system heating a 30,000 sq ft warehouse. Learn how 36 vertical boreholes, a 500-gallon buffer tank, and constant ground temperatures deliver 50–60% energy savings, and how the same technology scales to homes.

5 min de lecture

energy efficiency

The Benefits of Heat Pumps

As energy costs continue to rise, heat pumps have become one of the most efficient upgrades for your home. Discover how they save energy, reduce bills by up to 50%, and provide year-round heating and cooling.

4 min de lecture

Split image showing a hot room with orange tones and a cold room with blue tones illustrating uneven home temperatures

home comfort

Why Some Rooms in Your Home Never Feel Comfortable

Why do some rooms in your home feel too hot or too cold? The real cause is often the building envelope, not your HVAC system. Learn how airflow, insulation, and heat loss analysis can solve uneven temperatures.

8 de lecture

Peak Smart Thermostat - Greenfoot Energy Solutions branded blog card

smart home technology

Peak Smart Thermostat: Revolutionizing Home Climate Control

The Peak Smart Thermostat enhances home energy efficiency and comfort with smart climate scheduling, mobile app connectivity, and proactive maintenance alerts.

3 de lecture

Energy Saving Tips for Your Home - Greenfoot Energy Solutions branded blog card

solar energy

Energy Saving Tips for Your Home: Greenfoot's Guide for 2025

As energy prices rise, small changes can lead to big savings. Greenfoot Energy’s 2025 guide highlights practical, affordable ways to make your home more efficient, from smart thermostats and LED upgrades to cold-climate heat pumps and insulation improvements. Save money, stay comfortable, and take control of your energy use this year.

5 min de lecture

geothermal

Geothermal for Home or Business: How to Avoid Mistakes

Geothermal for your home or business. See how simple making the switch is and how to avoid costly mistakes in the process

10 de lecture

Greenfoot Partners with Saint John Energy - Greenfoot Energy Solutions branded blog card

partnerships

Greenfoot Renews Partnership with Saint John Energy

Greenfoot Energy renews its partnership with Saint John Energy to provide New Brunswick homeowners with affordable, efficient mini-split heat pump rentals.

3 de lecture

energy efficiency

Expert Energy Efficiency Tips for Canadian Homeowners

Achieve maximum energy efficiency with professional strategies from Red Seal certified experts. Reduce energy consumption by up to 40% through systematic improvements including insulation, HVAC optimization, smart technology, and proper maintenance – all with financing options available.

3 min de lecture

heating systems

Understanding HVAC Systems

Discover how HVAC systems work, why they’re essential for year-round comfort, and how investing in efficiency can save money while improving indoor air quality.

3 de lecture

maintenance plans

The Benefits of HVAC Systems

Explore the essential benefits of HVAC systems for home comfort and energy efficiency.

5 min de lecture

3 Common Heat Pump Misconceptions Debunked - Greenfoot Energy Solutions branded blog card

heat pumps

3 Common Heat Pump Misconceptions Debunked by Adam Robinson

Adam Robinson tackles three common heat pump misconceptions head-on: that they don't work below freezing, that they won't save money, and that they aren't environmentally friendly, with real numbers, COP explained, and the path to net zero.

4 de lecture

Voir tous les articles du blogue →

Pourquoi faire confiance à Kent

Kent Steeves a passé sa carrière dans les maisons du Canada atlantique : diagnostic de problèmes de chauffage, dimensionnement de thermopompes pour des chalets type saltbox jusqu'aux immeubles à logements multiples, et explication des phénomènes étranges (comme pourquoi vos serpentins côtiers se corrodent et ceux de votre voisin à l'intérieur des terres ne le font pas).

Le Coin de Kent, c'est la version courte des conversations qu'il a chaque semaine avec des propriétaires. Sans jargon, sans pression de vente. Juste des réponses claires aux questions que les gens posent vraiment.

Une question pour l'équipe de Kent?

Obtenez une évaluation gratuite et sans pression d'un conseiller Greenfoot Énergie. Thermopompes, solaire, isolation, tout y est.

Réservez une évaluation gratuite Appelez le 1-800-380-9384